Home Latest News Are We Alone in the Cosmos? Space Dynamics Lab to Help Answer...

Are We Alone in the Cosmos? Space Dynamics Lab to Help Answer the Question – Utah State University


Science & Technology
May 17, 2022
Illustration of the Nancy Grace Roman Space Telescope. (Credit: GSFC/SVS)
Utah State University’s Space Dynamics Laboratory announced Tuesday that it has delivered a critical subsystem to NASA’s Jet Propulsion Laboratory for integration onto the Nancy Grace Roman Space Telescope. The Cryogenic Thermal Subsystem for the Roman Coronagraph Instrument was delivered to JPL at SDL’s facilities on USU’s Innovation Campus.
SDL designed, built, tested, and delivered the Cryogenic Thermal Subsystem, which includes two space-qualified radiators, two thermal straps, and support structures that will reject heat generated by the detectors of Roman’s sensitive Coronagraph Instrument. One of two instruments on the Roman Space Telescope, the Roman Coronagraph Instrument will demonstrate technology to enable future missions to discover and characterize planets that could sustain life within their star’s habitable zones. Planets within a habitable zone are those within the range of a star where water could exist on the planet’s surface.
Since the 1970s, SDL has been at the forefront of developing thermal technologies for space applications. Early in its history, SDL understood the need for cryogenically cooled instruments to obtain accurate space-based measurements in the infrared and other wavelengths. Now a signature SDL capability, the thermal subsystems SDL designs and manufactures enable exceptionally sensitive instruments, which in turn provide scientists with information to better understand the universe and our place in it.
The Cryogenic Thermal Subsystem’s most critical function is to provide cooling to maintain the detectors in two of the Roman Coronagraph Instrument’s cameras at sufficiently low temperatures, approximately minus 161 degrees Fahrenheit, which will allow them to function with the required sensitivity. The first-stage radiator shields the second-stage radiator from the heat radiated by the Roman Coronagraph Instrument and other parts of the spacecraft.
Matt Felt, head of SDL’s thermal technologies, further explained, “Two thermal straps conduct heat from the cameras to the second-stage radiator, radiating that heat into deep space. Size and weight are premium commodities on any spacecraft, and SDL’s new Pyrolytic Graphite Sheet thermal strap technology allows the Cryogenic Thermal Subsystem’s mass to be significantly lower than previously possible with metallic straps.”
“The talented staff of NASA’s Jet Propulsion Laboratory have long been world leaders in developing technologies that enable space exploration. SDL is honored to support JPL and be a part of the historic Nancy Grace Roman Space Telescope program,” said Gabe Loftus, SDL’s program manager for the project. “The delivery of the Cryogenic Thermal Subsystem for the Roman Coronagraph Instrument shows our commitment to providing quality space flight hardware with the rigorous program execution that has become synonymous with SDL.”
The Roman Space Telescope is slated to launch no later than May 2027. With an estimated mass of 4,059 kilograms, the spacecraft will operate at the second Earth-Sun Lagrange point, where the gravities of the Earth and Sun balance each other, to answer fundamental questions about dark energy, exoplanets, and infrared astrophysics. It will measure the history of cosmic acceleration in addition to searching for worlds beyond our solar system.
Since 1959, SDL has been solving the technical challenges faced by the military, science community, and industry and supports NASA’s mission to drive advances in science, technology, aeronautics, and space exploration to enhance knowledge, education, innovation, economic vitality, and stewardship of Earth. SDL is a research laboratory headquartered in North Logan, UT, and has offices in Albuquerque, NM; Colorado Springs, CO; Dayton, OH; Houston, TX; Huntsville, AL; Los Angeles, CA; Stafford, VA; and Washington, DC. For more information, visit www.sdl.usu.edu.
SDL Mechanical Engineering Associate Paul Fluckiger (left), Mechanical Engineer Trever Mitton (center), and JPL Cryogenic Thermal Subsystem Project Lead Weibo Chen prepare the CTS for delivery to JPL in this April 25, 2022 photo at SDL facilities in North Logan, Utah. (Credit: SDL/Kelden Peterson)
SDL Mechanical Engineer Trever Mitton is pictured in this April 25, 2022 photo working on a part of the SDL-built Cryogenic Thermal Subsystem for the Nancy Grace Roman Space Telescope Coronagraph Instrument at SDL facilities in North Logan, Utah. (Credit: SDL//Kelden Peterson)
Eric Warren
Director, Public Relations
Space Dynamics Laboratory

Comments and questions regarding this article may be directed to the contact person listed on this page.
May 16, 2022     548
A pair of USU engineering researchers recently won the 2022 Applied Aerodynamics Best Paper Award from the 2022 American Institute of Aeronautics and Astronautics SciTech Forum.
May 10, 2022     1657
A small satellite built and operated by Utah State University’s Space Dynamics Laboratory to provide NASA with vital climate information completed its mission and performed more than 22 months beyond its mission requirement.
May 05, 2022     164992
April 25, 2022     2887
April 21, 2022     2678
April 28, 2022     2655
Old Main Hill,
Logan, UT
(435) 797-1000
Receive our weekly newsletter.


Previous articleAustralian scientists to power Tesla on 15000-km trip with printed solar panels – Reuters
Next articleHow to use an Xbox One controller on PC – BollyInside
Abhinav Breathes and Bleeds Technology. He's a humanoid with a passion for Gadgets, Cars, Gaming. You can usually find him on PSN Blabbering about his FIFA skills.