Victoria HDD/SSD

Input—per 1M tokens

Output—per 1M tokens

Context—tokens

WeightsClosed

About

Victoria HDD/SSD is ranked #4 of 24 in disk diagnostic software on Inferse. It runs on Windows. There is a free plan.

Compared on disk diagnostic software

Free plan: Yeshdd.by
Bad-sector scan: Yeshdd.by
Read/write testing: Yeshdd.by
Surface scan: Yeshdd.by
Bootable media: Nohdd.by
Platform: windowshdd.by
SMART tests: Yeshdd.by

Facts

Purpose: Victoria diagnoses, tests and performs minor repairs on hard drives, SSDs, memory cards and other storage devices in Windows.hdd.by · 30 Sept 2026
Surface scans: Its surface scanner checks for bad areas, unstable defects and interface errors, with automatic timeout and block-size adjustment.hdd.by · 30 Sept 2026
Quick scan: A quick test plots 188 points across a drive and the maker says it takes three minutes for any capacity; it does not find defects.hdd.by · 30 Sept 2026
USB support: The program can retrieve drive identity and SMART data over USB, and the maker says it supports 90% of USB-to-SATA bridge models.hdd.by · 30 Sept 2026
SMART monitoring: Victoria analyzes SMART data and shows the status of each attribute for HDDs and SSDs.hdd.by · 30 Sept 2026
SMART logs: It can read, analyze and write internal HDD and SSD SMART logs and display the results of built-in SMART tests.hdd.by · 30 Sept 2026
Drive information: The drive passport displays manufacturer, model, serial number, firmware version, logical parameters and interface details.hdd.by · 30 Sept 2026
Supported interfaces: The maker lists support for M.2/U.2 NVMe and SAS/SCSI storage devices.hdd.by · 30 Sept 2026
PIO mode: PIO mode accesses IDE/SATA drives through controller ports outside Windows and BIOS; the maker says it is for professional use and requires special knowledge.hdd.by · 30 Sept 2026
Data erasure: Victoria can erase storage media at the maximum speed supported by the device, according to the maker.hdd.by · 30 Sept 2026
System requirements: The listed systems are Windows 2000, XP, 7, 8 and 10 in x86 or x64, with at least 1 GB RAM; running the program requires administrator rights.hdd.by · 30 Sept 2026
Download: The site lists version 5.37, dated October 14, 2021, as the current version and provides a 1.5 MB download.hdd.by · 30 Sept 2026
Support: The maker says development and support have been handled by one person since the program moved to voluntary donations in 2018; the site offers articles, documentation and FAQs.hdd.by · 30 Sept 2026
Maker: The site identifies Sergey Kazansky as the author and lists the Victoria Technical Center in Belarus, with a 2004–2026 copyright.hdd.by · 30 Sept 2026