MoreClockTool

Input—per 1M tokens

Output—per 1M tokens

Context—tokens

WeightsClosed

About

MoreClockTool is ranked #8 of 18 in GPU overclocking software on Inferse. It runs on Windows. There is a free plan.

Compared on GPU overclocking software

Free plan: Yesigorslab.de
GPU vendor support: amdigorslab.de
Custom voltage control: Yesigorslab.de
Fan curve control: Yesigorslab.de
Power limit control: Yesigorslab.de
Tuning profiles: Yesigorslab.de
Operating systems: windowsigorslab.de

Facts

Purpose: MCT is a lightweight tool intended to complement MorePowerTool and Red BIOS Editor and replace AMD Wattman for simpler overclocking.igorslab.de · 3 Oct 2026
Supported graphics cards: The maker says MCT is for newer AMD graphics cards and lists support for RDNA 2 and RDNA 3; its April 2025 update adds RDNA 4 compatibility.igorslab.de · 3 Oct 2026
Clock controls: Users can enter minimum and maximum frequencies numerically in MHz.igorslab.de · 3 Oct 2026
Voltage and power: The tool can limit voltage upward and adjust GPU power by a percentage, with some ranges configurable through MorePowerTool.igorslab.de · 3 Oct 2026
Profiles: Users can save and load multiple settings profiles and load profiles created in Wattman.igorslab.de · 3 Oct 2026
Apply and reset: Set applies changes to the system in real time, while Reset restores factory defaults.igorslab.de · 3 Oct 2026
Memory timing and fan: MCT includes a Memory Fast Timing Level setting and fan controls analogous to Wattman; the maker directs users to MorePowerTool for further memory and fan settings.igorslab.de · 3 Oct 2026
Latest listed release: The download page lists MCT 1.1.11 Version 2, dated 12.04.2025, with ADLX 1.4 support, RDNA4 bug fixes, and an ImageSharpening Sharpen Desktop feature.igorslab.de · 3 Oct 2026
Distribution: The maker says the software is available free of charge from its site and warns that other sources may host unauthorized or older versions or malware.igorslab.de · 3 Oct 2026
Safety and liability: The maker describes use as experimental and at the user's own risk, says higher voltages may damage hardware, and says the software is not intended for 24/7 use with all settings in production systems.igorslab.de · 3 Oct 2026
Support: The maker directs feedback and discussion to the igor’sLAB community forum and asks users not to contact the editorial team directly about functionality or use.igorslab.de · 3 Oct 2026
Intended users: The maker says the tool should be used only by experienced users for evaluation purposes.igorslab.de · 3 Oct 2026